FOXWELL NT301 Plus OBD2 Scanner Battery Tester 4 in 1 Code Reader Scan Tool Auto 12V Battery Analyzer Diagnostic Tool PK NT301

The NT301Plus is a CAN OBDII/EOBD Code Reader and 12V battery tester, it provide easiest and cost-effective solution for OBD faults and battery status check. In addition, its 2.8" TFT color screen and hot keys for I/M readiness test, and reading/clearing DTCs streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.

Replace My Bad Battery In Time

1. Multiple automotive [8V-18V] applications: cars, light-duty trucks, SUVs, minivans, and hybrid sold worldwide;
2. Tests batteries from rated from 100 to 2000CCA. Cold Cranking Amps settings is in increments of 1 and you can line up with your battery ratings from 100 to 2000CCA;
3. Tests multiple battery types- regular flooded, AGM flat plate ,AGM spiral and gel;
4. Tests multiple rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB;
5. Support both in-vehicle and out-of-vehicle test, no need to remove the battery;
6. Provide reliable results within seconds, accurancy up to 99.9%; display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly;
7. Suitable for automobile factory, garage, auto battery manufacturer, and DIY enthusiasts, etc.
8. Please note that this battery tester for car can't do load test and deep cycle.

Affordable and Professional

Enhance OBDII Functions:

1. Prints the stored trouble codes/ freeze frame/ live data readings via PC, works for all windows systems.

2. Enhanced OBD2 Mode 6 On Board Monitoring Test Results for Specific Monitored Systems.

3. OBDII monitors supported: Misfire Monitor, Fuel System Monitor, Comprehensive Components Monitor, Catalyst Monitor, Heated Catalyst Monitor, Evaporative System Monitor, Secondary Air System Monitor, Air Conditioning Refrigerant Monitor, Oxy-gen Sen--sor Monitor, Oxy--gen Sen-sor Heater Monitor, Exhaust Gas Recirculation System Monitor.

I/M Readiness

Features the unique pattenred One-click I/M Readiness key for quick State Emissions readiness.I/M Readiness option allows to view a snapshot of the operations for the emission system on OBDII/EOBD vehicles.

When the monitor's status is:

● OK - vehicle was driven enough to complete the monitor.

● INC (Incomplete) - vehicle was not driven enough to complete the monitor.

● N/A (Not Applicable) - vehicle does not support that monitor.

Built-in DTC Library

With the DTC Lookup feature, the definitions of fault codes will be shown on the obd2 code scanner, which will save your time and energy to check it online. Click "?" and a more detailed description of the DTC will be presented.

Live Data in Text and Graph

NT301 Plus OBD-II full scanner shows live vehicle sensors data in text and graph formats and allows you to focus on any suspicious or symptom-specific data parameters.

FOXWELL NT301 Plus Diagnostic Tool Support Languages :

(1) English, français, Español, Deutsche and italiano

(2) English, Português, Magyar, Nederlands, svenska

(3) English, русский

FOXWELL NT301 Plus Diagnostic Tool Support Car List :

1. America Car List: (include Brazil)
Need standard obd2 , and release from 2001 years to now
Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep

2. Europe Car List:
Need standard obd2 , and release from 2004 years to now
Fit for Alfa Romeo ,Fit for SAAB ,Fit for Acura ,Fit for Opel, Fit for Audi ,Fit for Seat ,Fit for Peugeot ,
Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover
Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar

3. Asia Car List: (include Australia)
Japanese car Need standard obd2 , and release from 2006 years to now
Fit for KIA ,Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda
Fit for Nissan ,Fit for Subaru ,Fit for Suzuki, Fit for Toyota

4. Chinese Car List
Chinese car Need standard obd2 , and release from 2011 years to now
Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry

NOTE:
for Ssangyong Actyon, Kyron, Rexton, from 2011-2017 years.
for Ssangyong Korando, from 2013-2017 years
for Renault cars from 2016-2018 years.
Does not support for Renault / Dacia Logan , Clio.
Does not support for LADA, UAZ, VAZ

No Car OBD2 Scanner can work for all cars, If the device does not fit for your car, please try to test on another newly car.

Print & Update

Package Including:

1 x FOXWELL NT301 Diagnostic-Tool
1 x English User Manual
1 x USB cable
1 x Battery Cable