Tactrix Openport 2.0 + ECUFLASH Cable J2534 for Toyota/ Ford/ Mazda/ JLR/ Mitsubishi/ Subaru etc Work on Win10

Tactrix Openport 2.0 + ECUFLASH Cable J2534 for Toyota/ Ford/ Mazda/ Jaguar/ LandRover/ Mitsubishi/ Subaru etc



Highlights:

1. The OpenPort 2.0+ combined with our EcuFlash software.
The OpenPort 2.0+ is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles.
2. New full chip new module plan, fast high speed transfer and very stable function.
3. New PCB with inductance to increase voltage, suitable for tuning car under different voltages.
4. Field upgradable software
5. Tactrix Openport 2.0 was excellently tested with Toyota/ Ford/ Mazda/ Jaguar/ LandRover/ Mitsubishi/ Subaru
6. The Openport J2534 is also compatible with Mercedes Xentry Passthry, VW Audi Skoda, Ford, Mazda software.
(We don't provide software and after-sale service support if you use other third-party software)
7. Tactrix Openport 2.0 is compatible work with PCMtuner Dongle.

Warm Notice:

● There is a New version of 1444870_win software on the official website, don't install this new software with this Openport, otherwise will damage the unit!
● The latest version of the USB driver can not be used! Please Only Use our CD's USB driver! Otherwise the product will be damaged!
● A computer with Intel processor is strongly recommended. Better not use PC with AMD processors.
● CD will maybe easily broken in shipping way, so if CD can't be readable, please contact us to get a free download link
● Computer System Requirement: Windows XP/Win 7 32bits---CD Software request
● DO Not connect the Internet when you use it otherwise device will cause device damage.
● Close anti-virus programmer when run software.

Supported Protocols:

CAN 2.0
CAN/ISO15765 and K-line
KWP2000/dual K-line

Openport 2.0 Software List:

Openport 2.0+ECUFLASH
TIS Techstream V9.30.002
TIS 8.30.023 Activation
TIS Techstream V8.20.019
TIS Techstream V8.30.023（We also provide the latest version of Tis Techstream）
*VDF_L_DVD158_V5
*JLR158 License SW
SDD_DVD158.02
SPA_DVD158_V2
VDF_J_DVD158_V5
*SDD_DVD158_FULL

Tactrix Openport 2.0+ECUFLASH Specifications:

1. 72Mhz 32-bit processor
2. USB 2.0 full speed device (USB-A/Mini cable included)
3. J2534 PassThru support with Windows DLL
4. Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
5. Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
6. RGB status LEDs1 pc x Tactrix Openport 2.0+ECUFLASH Cable
1 pc x USB Cable
1 pc x CD